/
[CPU] Re-seating the CPU

[CPU] Re-seating the CPU

Owned by Joey Houy (Unlicensed)
Oct 06, 2016

Possible Problems

  • System does not power on
  • No video display when system powers on
  • System hangs at BIOS screen
  • System reboots instead of loading the Operating System

Solution

  • CPU is defective
  • Motherboard CPU socket pins are bent 
  • Separate article if defective CPU unit (for multiple CPU systems)


Access your motherboard by removing whatever cover or panels needed. Not all barebone/chassis/cases are all the same. The examples shown here may not match your system, but the procedure is similar.

  1. Access your System's Motherboard

  2. Remove Air Shroud (if system has it installed)
  3. Remove heat sink off the CPU
  4. Dismount CPU hold-down frame
    There are two clips that hold down the CPU.


  5. CAREFULLY remove CPU from socket
  6. Inspect Motherboard CPU socket pins


Related content