IPMI (TS4-672693)

Owned by ¥ (Unlicensed)
Last updated: Aug 25, 2021
2 min read

Setting up BMC/IPMI access is done in the BIOS. Look under the IPMI tab. Next open “BMC Network Configuration”.

 

BMC Network Configuration

Update IPMI LAN Configuration

Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot. The options include No and Yes.

*If the item above set to Yes, the following item will become available for user's configuration:

Configuration Address Source

This feature allows the user to select the source of the IP address for this computer. If Static is selected, you will need to know the IP address of this computer and enter it to the system manually in the field. If DHCP is selected, the BIOS will search for a DHCP (Dynamic Host Configuration Protocol) server in the network that is attached to and request the next available IP address for this computer. The options include Static and DHCP.

VLAN

This item configures the virtual LAN settings. The options include Disabled and Enabled.

IPv6 Support

Use this feature to enable IPv6 support. The options include Enabled and Disabled.

  

IPMI Port location

The lower Ethernet port (#3) is marked IPMI.

 

 Login Access

IPMI is accessed through a web browser (Firefox, Chrome, etc.) using the IP Address assigned/acquired in BIOS settings. If you have difficulties accessing the IP Address through the browser, please contact your IT Dept. Security/network settings may block access.

The default user name is “ADMIN”. The password is located on the System Info Flier. If this document is unavailable, please check the system chassis front pull out tab for the PWD value.