/
IPMI (TWS-1686525)
IPMI (TWS-1686525)
For TensorEX TWS-1686525
Setup
- Install network cable into dedicated IPMI port (Item 8)
Reach BIOS settings by repeatedly striking the 'del' key during system boot/splash screen.
- Navigate to: 'Server Management' → 'BMC network configuration' to gather BMC/IPMI IP address
Accessing web GUI
- Open a web browser on another computer/laptop (connected to the same network), and input the BMC/IPMI 'Station IP address' (from the BMC network configuration settings in the above steps) into the address bar
Example: - Enter username and password
Please refer to system info flier for username/password. If it is not listed, please use the manufacturer default username/password:
Username: root
Password: superuser
Usage
Please refer to board manufacturer's manual for their IPMI GUI
IPMI Event Log
'IPMI Event Log' should be viewed immediately upon any unexpected reboots/shutdowns
Related content
IPMI Setup and Configuration for BIOS and Web Interface
IPMI Setup and Configuration for BIOS and Web Interface
More like this
How-to articles
How-to articles
Read with this
IPMI (TS4-1598415)
IPMI (TS4-1598415)
More like this
Supermicro IPMI BMC reset to reset fan sensors
Supermicro IPMI BMC reset to reset fan sensors
Read with this
IPMI (TS4-1709194)
IPMI (TS4-1709194)
More like this
IPMI (TWS-1675363)
IPMI (TWS-1675363)
More like this