Setup

1. Install network cable into dedicated IPMI port (Area 2, Item 3; see below picture for specifics)

2. Reach BIOS settings by repeatedly striking the 'del' key during system boot/splash screen

3. Navigate to ‘IPMI’ tab → ‘BMC Network Configuration’ to gather BMC/IPMI IP address

If you are having difficulties getting an IP, contact your local site network IT/Admin since the IP from your network is exclusive to your site.

Open

Open

Below picture is an example from another system. Your IP and screen may differ.

Accessing Web GUI

Open a web browser on another computer/laptop (connected to the same network), and input the BMC/IPMI 'Station IP address' (from the BMC network configuration settings in the above steps) into the address bar. There are no picture examples for this currently. It is very similar to this article if you would like to see expected results. Example pictures or not, you should be able to navigate the tabs to gather BMC/IPMI event logs for the support representative to help further assist you if you currently have a support ticket for a suspected hardware issue.

IPMI (TS4-1709194) | IPMI(TS4 1709194) AccessingwebGUI

Login

Please refer to system info flier for username/password. If it is not listed, please use the manufacturer default username/password. If you continue to have issues logging into IPMI, contact your IT/Admin to confirm whether login credentials has been changed.

Username: ADMIN
Password: ADMIN