IPMI (TS4-1709194)

Owned by Joey Houy (Unlicensed)
Dec 30, 2019
2 min read

For models: TS4-1598415-NTS / TS4-1709194-NTS


Setup

  1. Install network cable into dedicated IPMI port (OCP Option Area - Item 7, then Item 1; see below picture for specifics)


    Item 1 for dedicated IPMI

  2. Reach BIOS settings by repeatedly striking the 'del' key during system boot/splash screen.

  3. Navigate to: 'Server Management' → 'BMC network configuration' to gather BMC/IPMI IP address

Accessing web GUI

  1. Open a web browser on another computer/laptop (connected to the same network), and input the BMC/IPMI 'Station IP address' (from the BMC network configuration settings in the above steps) into the address bar
    Example:


  2. Enter username and password


    Please refer to system info flier for username/password. If it is not listed, please use the manufacturer default username/password:

    Username: root
    Password: superuser

Usage

Please refer to board manufacturer's manual for their IPMI GUI


IPMI Event Log

'IPMI Event Log' should be viewed immediately upon any unexpected reboots/shutdowns