Installing Drives (TWS-1686525)

Owned by Joey Houy (Unlicensed)
Last updated: Dec 30, 2019Version comment
2 min read

For TensorEX TWS-1686525

  • Supports up-to eight 3.5"/2.5” HDD/SSD on select models (the picture below only displays the 4-drive bay model, but installation instructions are the same)

Step-by-step guide

Instructions to remove the front bezel can be found here: Removing the Chassis Cover (TWS-1686525)

  1. Press the locking lever latch and pull the locking lever open.


  2. Slide the HDD tray out.



  3. Place 3.5"/2.5” SSD/HDD into the HDD tray, and secure it with 4x screws.
    NOTE: Additional screws may be included in the chassis accessory kit

    3.5" HDD


    2.5" SSD/HDD



  4. Reinsert the HDD tray into the chassis and press the locking lever to secure the tray. Close the front bezel.


Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.