Rack Mounting (TWS-1686525)

Owned by Joey Houy (Unlicensed)
Last updated: Dec 30, 2019
3 min read

For TensorEX TWS-1686525

Rack kit sold separately. Contact a sales rep if you need the rack kit for this chassis/system model.

Rack Mounting Kit

  • Rail with Bracket x 2
  • Mounting Ears x 2
  • Screw Sack x 1

Screw Sack

A: Nut for M6 screw --- 10 pcs


B: M6--10 pcs

Installing the Server in a Rack

Installing the Inner Rails to the Unit

  1. Unscrew to remove the side cover.




  2. Screw the mounting ears to the chassis as shown using six M4-L5 screws (black).
    Left     Right 

  3. Press the latch to draw out the inner rails from each rail assembly.


  4. Install the inner sliding rail to each side of the server using five M4-L5 screws.

Installing the Outer Rails to the Unit

  1. Adjust the outer rails to fit the length of the rack. The sliding brackets have long slits to allow them to be fixed to the other part of the rails in various positions.


  2. Secure the outer rails to the rack using four M6 (2 front, 2 rear) screws (B) and five nut (3 front, 2 rear) (A) for each side. Secure the mounting brackets from outside, not inside of the rack.

Rack Mounting the Server

  1. Lift the unit and then insert the inner slide rails into the middle rails.


  2. Push the whole system in.


  3. Secure the mounting ears to the rack using two M6 screws (B).


  4. Push the latch on both sides of the chassis simultaneously to pull the system out.