Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

For models: TWS-1686525

  • Supports eight 3.5"/2.5” HDD/SSD. Follow these instructions to install drives into system.

Step-by-step guide

Instructions to remove the front bezel can be found here: Removing the Chassis Cover (TWS-1686525)

  1. Press the locking lever latch and pull the locking lever open.


  2. Slide the HDD tray out.



  3. Place 3.5"/2.5” SSD/HDD into the HDD tray, and secure it with 4x screws.
    NOTE: Additional screws may be included in the chassis accessory kit

    3.5" HDD


    2.5" SSD/HDD



  4. Reinsert the HDD tray into the chassis and press the locking lever to secure the tray. Close the front bezel.


Related articles appear here based on the labels you select. Click to edit the macro and add or change labels.



  • No labels