Table of Contents
Document Scope
Instructions on how to run the HGX-2 platform field diagnostics tool.
Where to obtain HGX-2 Fielddiag tool
How I loaded the tool onto a USB
- Format the target drive with GPT (GUID partition table) and add a FAT32
partition. For USB drives, this can be done with
[Rufus](http://rufus.akeo.ie).- When formatting a drive with Rufus, select `GPT partition scheme for UEFI
computer` and leave the `Create a bootable disk` option unchecked. Also
choose FAT32 file system type.
- When formatting a drive with Rufus, select `GPT partition scheme for UEFI
- Unpack the contents of the chosen profile package (e.g. full.zip) directly
to the root directory of the formatted drive.- For example, right click on the zip file in Explorer, choose
"Extract all..." and enter drive letter (e.g. e:) as the destination.
- For example, right click on the zip file in Explorer, choose
- When booting NVIDIA TinyLinux, make sure the "Secure boot" option is
disabled in UEFI setup.
Instructions from readme
Installation
-------------
Please follow these steps:
1) cd /var/diags/ (If the current directory is not /var/diags/)
2) tar xfz 629-FLDXX-YYYY-ZZZ.tgz
Running field diagnostics
Make sure IOMMU BIOS setting is disabled or it will not generate proper logs
-------------------------
Please follow these steps:
1) cd 629-FLDXX-YYYY-ZZZ
2) ./fieldiag.sh <options>
3) PASS/FAIL/RETEST will be displayed when fieldiag.sh finishes execution.
Please follow these steps:
1) cd 629-FLDXX-YYYY-ZZZ
2) ./fieldiag.sh <options>
3) PASS/FAIL/RETEST will be displayed when fieldiag.sh finishes execution.
Note: Full diag is expected to complete in ~5.5 hours.
Note: All tests will continue running even if some tests fail by default
Alternatively users can use --fail_on_first_error to fail immediately
Note: All tests will continue running even if some tests fail by default
Alternatively users can use --fail_on_first_error to fail immediately