| Table of Contents |
|---|
Tools Required |
|---|
  |
Step 1 - Open box, remove and organize necessary contents, remove plastic coverings
...
4x short shock spring screws
4x CPU tray mounting screws
8x short radiator-fan assembly screws
8x long fan-to-radiator mounting screws
Small tube of thermal compound (paste)
Remove plastic covers from cooling block contact plate. Failure to do so may result in melted plastic and possible additional damage/obstruction to processor. Cooling block may reach very high temps while system is under heavy use.
...
Step 2 - Position Liquid CPU Cooler and radiator fans so that all Manufacturer logos are displayed and upright after being installed into system
...