Installing Expansion / Graphics Cards (TWS-1675363)

Owned by Joey Houy (Unlicensed)
Dec 31, 2019
1 min read

Instructions to remove the top chassis cover can be found here: Removing the Chassis Cover (TWS-1675363)

  1. Remove chassis slot shields (if any)

  2. Insert expansion card into expansion riser slot, aligning the expansion card bracket with the slots in the rear

  3. Secure the expansion card using the same screws used to hold down the removed chassis slot shields

  4. Plug in the proper power cables from the PDB/Power Supply assembly to the expansion cards (if applicable)