Page Comparison

## Usually wget files into a new directory to keep extracted files in one place, otherwise you will get logs/readme's filling up wherever you're currently in

mkdir mprime
cd mprime
wget http://www.mersenne.org/ftp_root/gimps/p95v298b3p95v303b6.linux64.tar.gz
tar -xf p95v298b3p95v303b6.linux64.tar.gz

## Assuming you're not already in the mprime directory you created if you're doing this all in one go from this article

cd mprime
./mprime

## If this is your first time extracting/using, it will ask if you want to join GIMPS- I usually hit 'n' since this is for troubleshooting only anyways


[root@c103454 mprime]# ./mprime
             Main Menu

         1.  Test/Primenet
         2.  Test/Worker threads
         3.  Test/Status
         4.  Test/Continue
         5.  Test/Exit
         6.  Advanced/Test
         7.  Advanced/Time
         8.  Advanced/P-1
         9.  Advanced/ECM
        10.  Advanced/Manual Communication
        11.  Advanced/Unreserve Exponent
        12.  Advanced/Quit Gimps
        13.  Options/CPU
        14.  Options/Resource Limits
        15.  Options/Preferences
        1516.  Options/Torture Test
        1617.  Options/Benchmark
        1718.  Help/About
        1819.  Help/About PrimeNet Server
Your choice:


Number of torture test threads to run (4880):
Choose a type of torture test to run.
  1 = Smallest FFTs (tests L1/L2 caches, high power/heat/CPU stress).
  2 = Small FFTs (tests L1/L2/L3 caches, maximum power/heat/CPU stress).
  3 = Large FFTs (stresses memory controller and RAM).
  4 = Blend (tests all of the above).
Blend is the default.  NOTE: if you fail the blend test but pass the
smaller FFT tests then your problem is likely bad memory or bad memory
controller.
Type of torture test to run (4):

Your choice: 1516

Number of torture test threads to run (4880):
Choose a type of torture test to run.
  1 = Smallest FFTs (tests L1/L2 caches, high power/heat/CPU stress).
  2 = Small FFTs (tests L1/L2/L3 caches, maximum power/heat/CPU stress).
  3 = Large FFTs (stresses memory controller and RAM).
  4 = Blend (tests all of the above).
Blend is the default.  NOTE: if you fail the blend test but pass the
smaller FFT tests then your problem is likely bad memory or bad memory
controller.
Type of torture test to run (4):

Customize settings (N): y
Min FFT size (in K) (4):
Max FFT size (in K) (8192):
Memory to use (in MB, 0 = in-place FFTs) (382415): 360000
Time to run each FFT size (in minutes) (6):
Run a weaker torture test (not recommended) (N):

Accept the answers above? (Y):